SPO SERIES SINGLE POINT LOAD CELLS, from 5 to 40kg

Product Description

SPO SERIES SINGLE POINT LOAD CELLS

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 300×300 mm.
CAPACITIES (kg): 3, 5, 10, 15, 20, 30, 40.
OIML R60. C3 precision class.
Aluminium alloy. IP67 protection.

TECHNICAL FEATURES

Minimum load cell verification interval: Vmin = EMax/15.000
Maximum number of verification intervals: nLC = 3000
Full Scale Output: 2mV/V +/- 10%
Temperature effect on zero: 0,01% FS/10K
Temperature effect on full scale output: 0,001%FS /10K
Compensated Temperature Range: -10°C/+40°C
Operating Temperature Range: -10°C/+50°C
Creep error after 30 minutes: 0,01% F.S
Maximum tolerated excitation voltage: 15 VDC
Input Resistance: 300..500 Ohm
Output Resistance: 300..500 Ohm
Insulation Resistance: >2000 MOhm
Safe Overload: 150% F.S.
Ultimate Overload: 300% F.S.
4-wire shielded cable, 40cm long, 3,2mm diameter

ATEX Version

The CCATEX certificate makes the load cell suitable for use in
hazardous areas with protection methods according to:
ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C)
Da IP65. The certificate includes the manual and the ATEX CE
conformity declaration (available in EN, DE, FR, and IT).
IMPORTANT: the certificate refers to the single load cell.
For systems with more load cells, it is necessary to order one certificate for each load cell.

If you want to receive more information or an offer you can always contact us.