SPBC SERIES SINGLE POINT LOAD CELLS, from 100 to 630kg
SPBC SERIES SINGLE POINT LOAD CELLS
Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 700×700 mm.
CAPACITIES (kg): 100, 200, 300, 500, 630.
OIML R60. C3 precision class.
Aluminium alloy. IP65 protection.
Minimum load cell verification interval: Vmin = EMax / 10.000
Maximum number of verification intervals: nLC = 3000
Full Scale Output: 2mV/V +/- 10%
Combined error: 0,017% of Full Scale Output (F.S.)
Temperature effect on zero: 0,0028% /°C
Temperature effect on full scale output: 0,0014% /°C
Compensated Temperature Range: -10°C/+40°C
Operating Temperature Range: -20°C/+60°C
Creep error after 30 minutes: 0,025% F.S.
Maximum tolerated excitation voltage: 15 VDC
Input Resistance: 410 ± 10 Ohm
Output Resistance: 350 ± 5 Ohm
Zero Balance: +/-10% F.S.
Insulation Resistance: >1000 MOhm
Safe Overload: 150% F.S.
Ultimate Overload: 200% F.S.
Nominal displacement: < 1mm
SPBC 6-wire shielded cable, 3m long, 5mm diameter
The CCATEX certificate makes the load cell suitable for use in
hazardous areas with protection methods according to:
ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C)
Da IP65. The certificate includes the manual and the ATEX CE
conformity declaration (available in EN, DE, FR, and IT).
IMPORTANT: the certificate refers to the single load cell.
For systems with more load cells, it is necessary to order one certificate for each load cell.
If you want to receive more information or an offer you can always contact us