USB Measuring amplifier type GSV-3USB

Categories: Measuring amplifier for force sensors

Description
Reviews (0)

Description

USB measuring amplifier type GSV-3USB

The USB measuring amplifier type GSV-3USB is for sensors with strain gauge and is equipped with a USB interface. The power for this unit is supplied via the USB port on the back of the measuring amplifier. The sensor is connected by a 15-pin D-Sub connector. The amplifier is also available in a 2-channel version (GSV 3USBx2). In the two-channel amplifier, the sensors are connected via two connectors. Of particular note are the high sampling rate of 10 kHz and the high resolution of 16 bits, and the excellent range of commands to configure the measuring amplifier with ASCII control codes or via a Windows DLL. This amplifier can be configured via solder jumpers for the evaluation of SG quarter bridges (e.g. 350 ohms) or a voltage input ± 10V.
As an option, the USB measuring amplifier type GSV-3USB is available with connections for potentiometric displacement transducers, 4 -20 mA input and for incremental encoders.

Features USB measuring amplifier type GSV-3USB

1-channel straingauge amplifier in aluminum housing;
connection: plug connector;
dimensions: 110mm x 85mm x 35mm;
analog output: 0 V …5 V;
input sensitivity: 2 / 3,5 / 10 mV/V;
interface: 1x USB port, 1x 15pol. sub-D;
limiting frequency: 1250 Hz;
supply voltage: 4,5 V…5.5 V DC;
resolution: 16 Bit;
weight: 191 g;
environmental protection: IP54;

The measuring amplifier GSV-3USB is ideal for mobile use, because the aluminum housing (protection class: IP54) is very compact. The high limiting frequency of 1250 Hz is suitable for the detection of static and dynamic signals from sensors with straingages. Configuration via ASCII commands or Windows® DLL or Labview VI.

Link for more information USB measuring amplifier type GSV-3USB

You can buy a USB measuring amplifier from Dexman

We at Dexman know better than anyone that the right information is the most important thing. Because if a measurement is not correct, the solution is of no use to you. This applies not only to the solutions we offer, but also to the way in which we communicate. At Dexman, we stand for quality, service and solution orientation. In this, it is important to provide the right information, offer a good solution and be honest with each other.

Dexman is a supplier with a wide range of load cells, weighing platforms, pallet scales, crane scales, force sensors, torque meters, measuring amplifiers, pressure sensors en displacement sensors. You can contact us for standard versions, but also for custom-made components and complete weighing solutions. The choice of the right components usually starts with extensive advice.

We are active in the following sectors: offshore, aerospace, logistics, agriculture, food and pharma. Thank you for your interest in Dexman products and services. We look forward to the opportunity to serve you..